Fujitsu D2912, Руководство по биосу

Страница: 14 / 72

Navigating BIOS Setup
BIOS Setup with incorrect settings
Systemboot
If an incorrect setting in
BIOS Setup
prevents the system booting and the system cannot
be booted three times in a row, the default
BIOS Setup
settings will be applied once,
the next time the system is started. The following error message will appear:
Previous boot incomplete - Default configuration used
Pressing the
F2
allows you to check and correct the settings in
BIOS Setup
(see Chapter
"Error messages", Page 55 ). Any incorrect
BIOS Setup
settings that prevented the system
from booting can now be corrected. This will allow the system to start without error again.
Example showing the
BIOS Setup Main
menu
1
2
4
3
Main
Item Specific Help
System Time: [10:01:23]
System Date: [11/11/2009]
SATA Port 0
[HL-DT-STXXH10N-(S0]
SATA Port 1
None
SATA Port 4 [ST350063]
SATA Port 5 None
Boot Features
System Memory: 631K
Extended Memory: 2999M
Selects floppy type.
Diskette A
[None]
1 = Menu bar
2 = Working area 3 = Help area
4 = Operations bar
The
BIOS Setup
screen is divided into the following areas:
Menu bar (1): The menu bar is used to select the different
BIOS Setup
menus.
Working area (2): The working area displays the setting options ( fi elds) for the selected menu.
You can set the entries in the displayed fi elds according to your requirements.
► Indicates fi elds that open further submenus. You can change entries
in these submenus.
* Indicates con fi guration con fl icts that must be resolved to ensure that the
device functions correctly.
Help area (3): Brief information on the selected fi eld is displayed in the help area.
BIOSSetup
Operations bar (4) The operations bar lists the keys available for use with
BIOS Setup
.
10 Fujitsu Technology Solutions