Fujitsu B20T-6 LED Скачать руководство пользователя страница 34

Страница: 34 / 40

Troubleshooting

Should an error occur,

rst check the following points. If the distortion is still not eliminated,

the monitor should, if possible, be checked on another computer.

If you cannot solve the problem, please contact our Service Desk.

Having this problem?

Check the following points:

No screen display

Power indicator does not light up

►

Check whether the ON/OFF switch on the
monitor is switched on.

►

Check whether the power cable on the
monitor is connected correctly.

►

Check whether the computer is switched on.

No screen display

Power indicator is lit

►

Check whether the computer is switched on.

►

Check whether the data cable for the
monitor is correctly attached to the monitor
port on the computer.

►

Press any key on the computer keyboard.
The computer may be in power saving
mode.

►

Alter the brightness and/or contrast until you
get a picture.

Message:

No Signal

►

Check whether the data cable for the
monitor is correctly attached to the monitor
port on the computer.

►

Check whether the computer is switched on.

Message:

Frequency out of range:
## kHz / ## Hz
Please change the display mode
to 1600 x 900 with 60 Hz

The input signal (horizontal frequency and
refresh rate) at the displayed input does not
correspond to the technical data for the monitor.

►

Adjust the video frequency range using the
computer software (see documentation for
the computer or display adapter).

►

Set a different screen resolution using the
computer software (see documentation for
the computer or display adapter).

Picture position not correct

The monitor recognises an unde

ned mode (see

chapter

"Technical speci

cation", Page 33

►

Press the

AUTO

button to conduct the

auto-adjustment of the screen.

Picture is shaking

►

Check whether the data cable for the
monitor is correctly attached to the monitor
port on the computer.

►

Press the

AUTO

button to conduct the

auto-adjustment of the screen.

Picture is wrongly adjusted

►

Run the

Factory Recall

function in the OSD

menu.

The

Auto Processing

message appears.

Fujitsu Technology Solutions

Содержание B20T-6 LED









































Результаты поиска

Содержание B20T-6 LED

Отзывы:

Похожие инструкции для B20T-6 LED

Бренды по названию

Популярные бренды

Fujitsu B20T-6 LED, Руководство по эксплуатации

Результаты поиска

Содержание B20T-6 LED

Отзывы:

Похожие инструкции для B20T-6 LED

Бренды по названию

Популярные бренды