Fujitsu Aviamo P37FT05AEB Скачать руководство пользователя

Страница: 42 / 48

E-42

DIGITAL TV MODE SETTING (TV MENU) (Continued)

• Time Mode

It is switched each time

is pressed.

Auto

Manual

Normally use at Auto.

• UTC Offset

UTC Offset becomes effective when “Manual” was

selected by Time Mode. This function is used when the
received TV broadcast setup time is in the UTC mode.

Press

to adjust the offset.

The offset can be adjusted over the +12:00 to -12:00
range.

Displays the password input screen.

Enter the registered password.

* The factory set password is “0000”.

• Password Mode

This mode sets whether or not the password input screen

is to be displayed when the password input is requested.

It is switched each time

is pressed.

Always

None

Once

[Always]

Password input screen is always displayed.

[None]

Password input screen is not displayed.

[Once]

Password input screen is displayed once only.

(When once set to standby, the password input
screen is displayed again.)

• Parental Lock

Viewing restrictions by age can be set for programs to be

viewed. When a program with a viewing restriction was
received, the programs of the set age or younger cannot
be viewed.

It is switched each time

is pressed.

None

• • • • •

* The “Parental Lock” menu may not be displayed

depending on the broadcast station.

• Password change

The password can be changed by entering the passwords

in Old Password, New Password, Confirm Password
order.

Make a note so as not to forget the modified password.

Displays the information on the Smart Card when a Smart Card
is inserted. The contents and operation procedure vary
depending on the card company.

• Module information

The module information can be checked.

• Smart Card information

The information can be checked.

• Language

The language in which the Smart Card information is

displayed can be selected.

* The language which can be selected varies depending

on the card company.

• Software Download

When there is new software, it can be downloaded.

SYSTEM CONFIGURATION

Time Setup

Password Setup

“Enter Password” input screen

COMMON INTERFACE

NOTE

-Parental Lock

• When an operation other than the specified operation is performed while the Password input screen was displayed, the screen may become blank or

“Locked Service” screen may be displayed. In this case, press

and reset to the channel you want to watch.

7701_01_E.book 42 ページ２００７年３月２２日　木曜日　午後２時３８分

Содержание Aviamo P37FT05AEB

















































Результаты поиска

Содержание Aviamo P37FT05AEB

Отзывы:

Похожие инструкции для Aviamo P37FT05AEB

Бренды по названию

Популярные бренды

Fujitsu Aviamo P37FT05AEB, Руководство пользователя

Результаты поиска

Содержание Aviamo P37FT05AEB

Отзывы:

Похожие инструкции для Aviamo P37FT05AEB

Бренды по названию

Популярные бренды