Applications
89
You can use Osaifu-Keitai service which allows you to pay
money or to use coupon only by holding the terminal over the
IC card reader in stores etc. and "
かざしてリンク対応サービス
(Kazashite-Link compatible service)" which allows you to
access information by holding the terminal over a home
appliance, a poster, etc.
You can save electronic money and points to an IC card of the
terminal and a docomo nano UIM card. Also, you can check
balance of electric money and point value on the screen. By
locking Osaifu-Keitai functions, you can prevent the terminal
from being used without your permission in case of theft or
loss.
For details on Osaifu-Keitai, refer to NTT DOCOMO website.
・
A setting from the dedicated website or application is
required to use Osaifu-Keitai compatible services.
◆
Precautions on using Osaifu-Keitai
compatible terminal
・
Data in the IC card
*1
and in the docomo nano UIM card
*2
may be lost or modified because of the malfunction of the
terminal (when we repair your terminal etc., as we cannot
repair it with Osaifu-Keitai data remained, you are required
to erase the data yourself). For more information about
reissuing and restoring data, and support for saving and
transferring data, contact the Osaifu-Keitai compatible
service provider. For important data, be sure to use an
Osaifu-Keitai compatible service with backup service.
*1
Data saved in IC card installed to Osaifu-Keitai compatible
terminal
*2
Data stored on a docomo nano UIM card
・
If you use a docomo nano UIM card of the previous model,
to use Osaifu-Keitai compatible services, install and set the
application of Osaifu-Keitai compatible service providers.
・
If the data in the IC card and docomo nano UIM card is lost,
modified or damaged by any means related to Osaifu-Keitai
compatible service such as malfunction or model change,
DOCOMO assumes no responsibility for the loss of data.
・
If the terminal is stolen or misplaced, immediately contact
Osaifu-Keitai compatible service provider for an advice.
◆
Using "Osaifu-Keitai service"
1
From the Home screen,
→
[Osaifu-Keitai]
・
If the initial setting has not yet made, the initial setting
screen appears. Follow the on-screen instructions to
set.
2
Select a service
3
Set up the service
・
Make the required settings from the service site or
application.
Osaifu-Keitai
Содержание Arrows NX F-01J
Страница 1: ...F 01J INSTRUCTION MANUAL 16 11 ...