14-8. Wired remote controller (UTY-RLRY)
DIP switch
Memory backup setting
¢
Switch location
Front case (back side)
Set the DIP switch to ON
OFF
ON
¢
Dip switch setting
SW1: Memory backup setting
Set to “ON” to use batteries for the memory backup.
When batteries are not used, all of settings stored in memory will be deleted if there is a power
failure.
SW1
Memory backup
Factory setting
OFF
Disable
♦
ON
Enable
14-9. Wired remote controller (UTY-RNRYZ*)
DIP switch
Memory backup setting
¢
Switch location
Front case (back side)
Set the DIP switch to ON
OFF
ON
O
N
¢
Dip switch setting
SW1: Memory backup setting
Set to “ON” to use batteries for the memory backup.
When batteries are not used, all of settings stored in memory will be deleted if there is a power
failure.
SW1
Memory backup
Factory setting
OFF
Disable
♦
ON
Enable
- 279 -
14-8. Wired remote controller (UTY-RLRY)
14. Function settings
4-5 UNIT
MULTI-SPLIT TYPE
4-5 UNIT
MULTI-SPLIT TYPE