Fujitsu 7119601, Руководство пользователя

Страница: 16 / 29

# /usr/sbin/format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
:
2. c9t1d0 <SAMSUNG-MZPLL3T2HMLS-000-GPNA-2.91TB>
/pci@8300/pci@4/pci@0/pci@1/nvme@0/disk@1
/dev/chassis/SYS/PCI#2/NVME/disk
Specify disk (enter its number):
partition> print
Current partition table (original):
Total disk sectors available: 6251217517 + 16384 (reserved sectors)
Part Tag Flag First Sector Size Last Sector
0 usr wm
34
2.91TB 6251217550
1 unassigned wm 0 0 0
2 unassigned wm 0 0 0
3 unassigned wm 0 0 0
4 unassigned wm 0 0 0
5 unassigned wm 0 0 0
Chapter 3 Fujitsu 3.2 TB Flash Accelerator
Card Settings
This chapter describes how to configure the Fujitsu 3.2 TB Flash Accelerator Card.
3.1 Checking the Fujitsu 3.2 TB Flash Accelerator
Card
You can check the Fujitsu 3.2 TB Flash Accelerator Card in the same way as detecting a hard disk drive.
The command shown below is an example.
3.2 Optimizing the Fujitsu 3.2 TB Flash Accelerator
Card
To obtain optimal performance, arrange all partitions to start on a 4 KB boundary.
In the following command example, the first sector of the partition is not aligned on a 4 KB boundary (1
sector = 512 bytes).
Chapter 3 Fujitsu 3.2 TB Flash Accelerator Card Settings
C120-0067-02EN
3.2 Optimizing the Fujitsu 3.2 TB Flash Accelerator Card
6