Fujitsu 5110C - fi - Document Scanner, Руководство оператора

Страница: 40 / 137

CONTENTS
INTRODUCTION
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATIONS
2.1 Turning the scanner ON
2.2 Loading Documents on the ADF for
Scanning
2.3 Scanning Documents
2.4 How to Use the Scanner Driver
3 SCANNING VARIOUS TYPES OF
DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 DOCUMENT SPECIFICATIONS FOR ADF
8 OPTIONS
9 SCANNER SPECIFICATIONS
Appendix
2.4 How to Use the Scanner Driver(9)
1 2 3 4 5 6 7 8
9
10
FUJITSU ISIS Scanner Driver
FUJITSU ISIS Scanner Driver is designed for scanning documents with FUJITSU image scanner fi series by
using application software that complies with The ISIS standard.
The following describes the procedure with examples of QuickScan for ordinary scanning by using this driver
software.
The procedure may vary depending on your application. If you use an application other than QuickScan,
please refer to its Guide or Help for further information.
1. Procedure for Basic Scanning Operation
Startup the application.
From the [Start] menu, select [Programs] - [QuickScan] and click [QuickScan].
Select your scanner on the window below.
Select [Scan] - [Select Scanner] on the menu bar.
Select fi-5110C, then click the [OK] button.
Select [Scan] - [New Batch] on the menu bar.
1 2 3 4 5 6 7 8
9
10
CONTENTS