A26391-K115-Z120-2-7619
11
Preparing the workstation for use
!
Please read the chapter "Important notes".
Before you can work with your workstation, you need to charge the battery and install and configure
the delivered software. The operating system and drivers required are preinstalled.
Upon delivery, the battery can be found in the battery compartment and is not charged. You need to
charge the battery if you want to operate your workstation with a rechargeable battery.
If you use the workstation in a normal office situation, run it off the mains using the power adapter.
Unpacking and checking the delivery
Ê
Unpack all the individual parts.
Ê
Check the delivery for damage incurred during transportation.
Ê
Check whether the delivery agrees with the details in the delivery note.
i
Should you discover that the delivery does not correspond to the delivery note, notify your
local sales outlet immediately.
Do not discard the original packing material of the devices. Keep the original packing
material in case you need to ship the equipment again.
