Fujitsu Siemens Computers PRIMESTATION Series, Руководство пользователя, Страница: 14 / 153

8
U41270-J-Z916-2-76
Functions supported as an SMC Functionality
©
S
iem
en
s
N
ix
d
or
f I
n
fo
rm
at
ions
s
y
s
tem
e
A
G
1
997
P
fa
d
: H:
\onl
in
e_p
ro
duc
in
g
\02_
1
1
_
06_
E
rdm
u
tHu
ebn
er
Hat
z
el
\4
1
270
e2
\4
127
0e
1.
k
0
3
– The
xscon
tool is used to select and represent one or more consoles of RM
and PRIMEPOWER (MR) servers.
– Support for WSA (Web-based System Administration)
– RM and PRIMEPOWER (MR) servers can also be booted and installed
remotely (via LAN).
3.2 Functions supported as an SMC
The PRIMESTATION can be used on PRIMEPOWER enterprise servers as a
System Management Console (SMC) (see also manuals for SMC and System
Console Software in the Related publications section):
– The SMC can check the hardware configuration and the operating status of
the PRIMEPOWER system.
– The SMC performs resource partitioning and in this way allows the shared
use of the processor and storage capacities of the PRIMEPOWER system.
– The SMC supports individual console displays for the different partitions.
– The SMC supports a power supply scheduling system, which allows the
selective switching on and off of the PRIMEPOWER system.
– The DVD drive on the SMC can be used across partitions. This means that
operating systems and applications can be installed in every partition of the
PRIMEPOWER system.
– Clock tuning is performed for every partition of the PRIMEPOWER system
with the SMC clock via the Network Time Protocol (NTP).
– The SMC monitors the entire hardware of the PRIMEPOWER system. If an
error is detected, relevant information is displayed on the SMC. The system
administrator is then notified immediately by e-mail.