Fujitsu Siemens Computers PRIMERGY SX30, Руководство по эксплуатации

Страница: 85 / 101

U41169-J-Z156-4-74
85
12 Fault Clearing
V
CAUTION!
Note the safety instructions in the “Safety, Guarantee and Ergonomics“
manual and in
section “Connecting and Disconnecting Leads” on
page 82 .
If a fault occurs, attempt to rectify it in accordance with the measures set out
below:
●
Which are described in this chapter,
●
Which are described in the documentation for the connected server and the
disk array controller used.
If you cannot rectify the fault, proceed as follows:
Ê
Note the steps that you have performed and the state which was active when
the error occurred. Note also any error message which may have been
displayed.
Ê Switch OFF the connected server.
Ê
Switch OFF the storage subsystem and pull out the power plug.
Ê Contact our service organization.