Fujitsu Siemens Computers PRIMERGY RX100 S4, Руководство пользователя

Страница: 33 / 285

33
PRIMERGY RX100 S4 User’s Guide
1
Overview
1.4.3 Turning Off the Server
1
Make sure that the CD-ROM drives are empty.
2
Shut down the OS.
In the following cases, the server is turned off after the OS is shut down (Step 3 is not necessary).
• Windows OS
• When ServerView is installed
In other cases, shut down the OS and make sure that hard disk access LEDs are off.
3
Press the power switch at the front of the server with a penpoint or thin object.
The server's power LED turns amber.
4
Turn off the display and peripheral devices.
The server turn off time can be set with the ASR setting (on the [Power On/Off] tab) using ServerView
supplied with this server. For details, refer to "3.4 Serious Error Handling (ASR)" in "ServerView User's
Guide" on the PRIMERGY Document & Tool CD.
• In the event of smoke or sparks, immediately unplug the power plug from the
outlet. Failure to do so may lead to a fire or electric shock.
• When turning off the server, make sure to follow the procedures described in
this section. Data may be lost if these procedures are not followed correctly.
• Make sure to wait for 10 seconds or longer after shutdown before turning the
server on.
Power switch
The server’s
power LED
turns amber