background image

Transporting the system 

12 

3 Transporting the system 

 

If you are going to transport your computer over a long distance, 
for example in a vehicle, you must ensure that the data carriers are 
not at risk of being damaged by the transport. When transporting 
the computer in a vehicle, always make a complete backup of the 
hard disk on an external data carrier. 

If you are transporting the PC only a short distance, i.e. only to 
another room or to a different desk, a backup need not necessarily 
be carried out. However, you must make sure that the unit is 
transported carefully. 

For the onward shipment of the product or other transport, use the 
original packaging or other suitable packaging which provides 
protection against shock and impact. 

Detach all external cable connections and transport all devices 
separately and only in their original packaging or in other suitable 
packaging which guarantees protection against shock and impact.  

Do not drop the device and do not expose it to severe vibrations. 
 

CAUTION!

   The computer should ideally be transported in the 

original packaging which has been specifically 
designed for this purpose. 

We only use recyclable material to package our units.  

 
 
 

Содержание Fujitsu-Siemens PC

































































































Отзывы: