Fujitsu Siemens Computers AMILO Li Series, Легкое руководство, Страница: 59 / 78

Removing and installing components during servicing
Removing and installing the hard disk
Hard disk removal
► Switch the notebook off and pull the power plug out of the mains socket.
► Close the LCD screen so that it locks into place.
► Disconnect all cables connected to the notebook.
► Turn your notebook over and place it on a sturdy, fl at surface.
► Remove the battery (see "Removing the battery", Page 25 ).
Hard disk
1
2
► Remove the screws (1).
► Lift the cover off the notebook in the direction
of the arrow (2), working towards the centre .
4
1
2
1
3
► Remove the two screws (1) from the
frame of the hard disk.
► Pull the hard disk using the pulling aid (2) in
a straight line in the direction of the arrow (3).
► Remove the hard disk with the frame (4)
from the hard disk compartment.
► Remove the 4 screws from the frame of the hard disk.
► Pull the hard disk out of the frame.
10600771542, edition 1 49