Fujitsu Siemens Computers AMILO Desktop L Series, Первоначальная настройка

Страница: 34 / 103

Getting started
Getting started
Gettingstarted
Please observe the safety information in the "Important information", Page 3 chapter.
Unpacking and checking the equipment supplied
Keep the original packaging of the equipment in case you need to return it.
Packaging Equipmentsupplied Packaging,
► Remove all the equipment from the packaging.
► After removal from the packaging, check the equipment for evidence of damage in transport.
► Check that that the equipment matches the delivery note.
If you
fi nd damage in transport or a mismatch with the delivery note,
inform your sales of fi ce without delay!
Steps for initial startup
Initialstartup,overview Starting Up
Only a few steps are required to start up your machine for the fi rst time:
• Select the position for your machine and place it there
• Connect the external devices
• Check the rated voltage and connect the machine to the mains
• Switch on the machine
You can fi nd more details on the individual steps in the following sections.
External devices
If you wish to attach other external devices (such as a printer) to your machine,
complete the initial installation of your machine before connecting them. The steps for
connecting these external devices are described in the following sections.
Drives and modules
If you wish to fi t other drives or modules to your machine, complete the initial installation
of your machine before fi tting them. The steps for fi tting drives and modules are
described in the "AMILO Desktop" manual in the chapter"System expansion" .
10600985329, edition 1 English - 7