background image

Range Hood

INSTALLATION MANUAL

MODEL: FDR-4200

FDR-4200D

1U030481

READ AND SAVE THESE INSTRUCTIONS.

Keep this manual in a convenient place for future reference.

FUJI INDUSTRIAL CO., LTD.

TABLE OF CONTENTS

Safety Instructions .............................................................................................. 2
Name of Parts ..................................................................................................... 4
Size & Dimensions .............................................................................................. 5
Range Hood Location ......................................................................................... 5
Installation ........................................................................................................... 6

1. Preparation ................................................................................................ 6
2. Range Hood Mounting ............................................................................... 9
3. Connecting Power Supply Wires ............................................................. 10
4. Attaching Duct Cover ............................................................................... 11
5. Final Assembly and Check ...................................................................... 12

Explanation to the End User ............................................................................. 13
Circuit Diagram ................................................................................................. 13

Содержание FDR-4200















Отзывы: