Fujikura FSM-60S, Инструкция по эксплуатации

Страница: 10 / 119

8
Warning and Caution
CAUTIONS
Follow the below listed instructions for handling electrodes.
• Use only specified electrodes.
• Set the new electrodes in the correct position.
• Replace the electrodes as a pair.
Failure to follow the above instructions may cause abnormal arc discharge. It
can result in equipment damage or degradation in splicing performance.
Do not use any chemical other than pure alcohol (99% or greater) to clean the
objective lens, V-groove, mirror, LCD monitor, etc., of the splicer. Otherwise
blurring, discoloration, damage or deterioration may result.
The splicer requires no lubrication. Oil or grease may degrade the splicing
performance and damage the splicer.
The equipment must be repaired or adjusted by a qualified technician or
engineer. Incorrect repair may cause fire or electric shock. Should any
problems arise, please contact your distributor.
RECYCLING and DISPOSAL
In European Union
In accordance with the European Parliament Directive 2002/96/EC, electrical
parts and materials that can be re-used and/or recycled have been identified in
order that the use of new resources and the amount of waste going for landfill
can be minimised.
In the European Union, do not discard this product as unsorted municipal waste.
Contact your local authorities.
In other countries
[Recycling]
To recycle this product, disassemble it first, sort each part separately by material
components and follow your local recycling regulations.
[Disposal]
This product can be disposed of same as the standard electric poroducts. Follow
your local disposal regulations.
!