Fujikura FSM-100M, Инструкция по эксплуатации, Страница: 148 / 193

140
Splice Result Memory
How to display camera image data
Select the desired image by moving the cursor to a specific memory number
and press the ENT key. The fiber image data is displayed on the monitor.
How to delete camera image data
Select the appropriate number in [Camera Image] and the press the MENU key.
Press the ENT key to confirm and execute deletion.
2.
Comments of Splice Results
Splicing results data is automatically stored in memory when the SET or RESET key is
pressed upon completion of the splice at the [FINISH] screen, or when the wind
protector is opened upon completion of the splice at the [FINISH] screen. Once a
comment has been input, the same comment will automatically be input into
subsequent splice results. To change comments, see the section [How to input Mode
Title / Comment / Password] for instruction on comment input. At the time of shipment
from the factory, there is no default comment input.
ENT
Select
memory
number
+
ENT
MENU
ENT