FujiFilm SONOSITE X-PORTE, Руководство пользователя

Страница: 51 / 366

Setting up the system 3-15
1 Connect the Ethernet cable to the Ethernet port on the back of the dock (see “Ports” on page 2-20).
With the system on, the LAN link light (green LED) next to the Ethernet connector indicates physical
connection to the network.
2 See “DICOM configuration pages” on page 3-16 to configure and save a location with the correct
network settings.
To connect to the network wirelessly
Wireless connectivity is a licensed feature.

See “DICOM configuration pages” on page 3-16 to configure and save a location with the correct
network settings.
The wireless icon indicates the status of the wireless connection (the number of white bars indicates
the strength of the connection).
(Optional) To import or delete wireless certificates
If your security scheme requires it, you can import wireless certificates. The system supports the following
file types: CER, PFX, and PVK.
1 Tap MORE , and then tap System Settings .
2 Tap Connectivity in the list on the left.
3 On the Connectivity setup page, tap Wireless Certificates .
A list of certificates on the system appears.
4 Do one of the following:

Import certificates: Connect the USB memory stick that contains the certificates (see “To connect a
USB memory stick for importing or exporting” on page 2-6). Verify that the certificates on the
system, plus those on the USB memory stick, do not exceed 20. Delete certificates if necessary. Then
tap
Import .

Delete certificates: Select the certificates to delete, and then tap Delete
5 Tap Done .
6 Restart the system.
Caution To avoid losing data from or damaging the USB memory stick, do not remove
the USB memory stick or turn off the ultrasound system while exporting. In
addition, do not bump or apply pressure to the USB memory stick while it is
connected to the system. The connector could break.
Note Certificates on the USB memory stick replace certificates on the system.