FujiFilm Frontier DE100 Скачать руководство пользователя страница 124 | Manualshive

Страница: 124 / 188

FujiFilm Frontier DE100 Скачать руководство пользователя страница 124

6-12

- Frontier DE100 Operation Guide -

Maintenance tool

6.2.3 Head Maintenance

In Head Maintenance you can perform printer maintenance operations such as Normal

Cleaning and Power Cleaning. Make sure the printer’s power light is on before performing Head

Maintenance.

6.2.3.1 Using Head Maintenance

This function checks for clogging in the print head, and clears the clogging if any is detected. If

the nozzles are clogged, stripes may appear in the print outs, and the colors may differ from the

standard, expected colors. If this occurs, use the head maintenance functions as described on the

following pages.

Normal Cleaning

Normal head cleaning.

Power Cleaning

A more powerful head cleaning.
Use this setting if the nozzles are
still clogged even after repeating
Normal cleaning several times. Power
consumes more ink than Normal
cleaning. If a message is displayed
informing you that here is not enough
ink remaining, replace the Ink cartridge
before continuing.

Nozzle Check

Check for clogged nozzles.

«
...
122
123
124
125
126
...
»

Содержание Frontier DE100





























































































































































































Отзывы:

Нет отзывов