FinePix S602 ZOOM SERVICE MANUAL
5. Inspection
71
5-2-19.Settings at Shipment
Procedure and Checks
1) Mode dial : Auto photography
2) Check that the battery and memory card are not inserted.
3) Card cover : Closed
4) Battery cover : Closed
5) Flash : Retracted
6) Power lever : OFF
7) AF/MF selector switch : AF
8) EVF diopter adjustment dial : Set to central position.
9) Jack cover : Closed
10)
DC cap : Closed
5-2-20.Clock Setup and Clear
Procedure and Checks
1) Connect the USB cable between the PC and the camera.
· Check that the PC is switched ON.
2) Open the card cover, and with the release button pressed, switch power
ON.
3) Set the camera power lever to OFF.
· No operation is needed at the PC.
4) Remove the USB cable and connect it again.
5) Close the card cover and set the camera power lever to the Playback
mode.
· Check that the USB card reader symbol is displayed on the LCD
monitor.
· Check that the PC is recognized as a removable disk.
6) Set the camera power lever to OFF.
· Check that camera power is OFF.