FinePix S602 ZOOM SERVICE MANUAL
4. Adjustment
55
0148400
0750
0148400
0750
<Fig.16>CCD Serial Number
4-4-5.Preparing the CCD Defect Data (FD)
Purpose
The CCD defect data file used when replacing the MAIN PWB ASSY is prepared as follows.
* The serial number in the diagram at right is used as an example.(Fig.16)
Procedure
1) Record the CCD serial number on the LENS CONST when replacing the MAIN PWB ASSY.
The numbers in the diagram at right are as follows.
Top:
0148400 (seven digits)
Bottom:0750 (four digits)
The name of the defect data file
containing the numbers is
[14840750.dat]
.
The first, and last two, of the top seven digits are ignored, and only the second, third, fourth, and fifth digits
are read. The top four digits which are read are combined with the bottom four digits to form the CCD defect
data file name. Copy this file name to a sheet of paper.
[Note]
1. Always ensure that the CCD serial number is read correctly. If the file name is read incorrectly, the defect data
for the that file name (ie defect data for another CCD) will be used.
2) Download the ZIP file of top four digits from Web server (http://fujifilm-di.intranets.com/).
Open ZJ00535-100[(Fig.17-(1)] in the CCD defect data folder, and download "1484.zip[Fig.17-(2)]".
3) Decompress "1484.zip".
-->"1484 folders" including "14840750.dat" is made.
4) Insert a writable floppy disk into the floppy disk drive on the computer.
5) Open in "1484 folders", search for
"14840750.dat [Fig.17-(3)] "
, and copy it onto thefloppy disk.
[Note]
1. The file identifier for the CCD defect data is ".dat". With some Windows settings, the identifier is not dis-
played. Change the setting in such cases.
2. In some cases the CCD serial number includes letters as well as numbers. In such cases the file name is
formed in exactly the same way.
3. Do not create a folder on the floppy disk when copying the file.
4. The defect data file may be used after copying to the C: drive on the computer, however it should be labeled
clearly to ensure that it is recognizable as FinePix S602 CCD defecte data, and kept in a safe place.
6) Using the defect data in the floppy disk prepared in Step 5, perform 4-4-4.CCD deta input.
< Fig.17> Defect data making procedure chart
(2)
(3)
(1)
(http://fujifilm-di.intranets.com/).
