FujiFilm FinePix S5200, Руководство по обслуживанию, Страница: 100 / 121

100
5. Inspection
FinePix S5200/S5600 Service Manual
5-3. Inspection and Factory Settings
Sequemnce Item Mode Preparations for adjustment
(measurement points, subject, other)
Method of adjustment
(VRs, waveforms, required values)
Measuring
equipment and jigs
Measurement points
(VRs, positions)
1
2
3
4
External visual
check
Power switch
check
Zoom operation
check
Shock noise check
in Auto mode
Auto mode
LCD-ON
EVF-ON
Auto mode
LCD-ON
(1) Observe the camera.
(1) Connect the power supply
jig to the DC_IN terminal.
(2) Insert a card and close the
card cover.
(3) Select the Mode dial
setting.
(4) Turn the camera on in
Photography mode.
(5) If a message prompting
the user to set the date
appears, press the button
specified on the right.
(6) Check the display status.
(7) Press the <EVF/LCD>
button.
(8) Turn the dioptric
adjustment dial up and
down.
(9) Check for blemishes in the
CCD live image.
(1) Zoom drive noise
(1) Apply a shock to the
camera using the shock
jig.
(1) Check for damage to the
outer casing
(2) Check for problems with
the clicking or sliding
movement of switches.
(3) Check for dust or fogging
in the viewfinder and AF-
assist flash window.
(4) Check for dust or fogging
in the LCD.
(1) Applied voltage:
5.0±0.05 V
(2) Card for recording
checking
(3) Mode: AUTO
(4) Check that the camera
beeps.
(5) <DISP/BACK>
(6) Check that the live image
and text is displayed.
(7) Check that the live image
is displayed.
(8) Check that the blurring of
the EVF screen varies.
Check that the dial turns
smoothly between the
upper and lower limits.
(9) Monitor a very bright
subject and check that the
live image does not dim or
darken.
(1) Check that there is no
abnormal noise.
(1) Check for problems on the
LCD monitor.
Check that the camera
recovers from
synchronicity disruption.
(Note) Do not apply shocks
directly to the lens or card
cover.