71
3
70
This mode can be selected in the “
5
•
7
•
9
•
4
”
photography modes.
Set this setting to “ON” when you are using an
external flash.
●
Synchronization speed :
Up to 1/1000 sec.
➀
Close the built-in flash.
➁
Mount the external flash on the camera’s hot
shoe.
●
!
Built-in and external flash units cannot be used at
the same time.
1
2
Select “
5
•
7
•
9
” (
P.42) or “
4
” (
However, the use of “
9
” or “
4
” mode is
recommended.
MODE
SELECT
F
ISO
mm
AUTO
3
4
I
USING AN EXTERNAL FLASH
PHOTOGRAPHY MENU
●
➀
●
➁
◆
Compatible Flash Units
◆
Flash units that can be used with this camera
must meet the following 3 conditions :
●
The aperture can be set.
●
External flash synchronization can be used.
●
The ISO sensitivity can be set.
When you are using an external flash, always
specify a fixed aperture setting.
External Flash Settings
For external flash, refer to the user’s manual for
the flash and specify the settings as described
below.
●
Match the settings to the camera aperture
setting.
In “
5
” or “
7
” mode, match the settings to the
aperture measured by the camera.
●
Match the ISO sensitivity setting (
the setting on the camera.
●
Select External Flash mode (TTL mode cannot
be used).
●
!
●
!
Flash photography cannot be used when continuous
shooting (
selected.