FujiFilm DR-ID 1300, Руководство по обслуживанию

Страница: 216 / 628

MU1-51
MU1-51
DR-ID 1300 / DR-ID 1300PU Service Manual
018-234-06E
1.4.10 Long Panel Point Defect Specifications Excess Area
Display
From the log information which is saved in the MC, display the point defect areas that
have grown beyond the specifications on the FPD. These point defects are registered
in the logs when the defect calibration is performed (when fully calibrating, when
finishing calibrating, and when automatic defect calibrating).
Moreover, the point defect areas that are displayed here are corrected by the FPD
calibration and may not affect the images.
In addition, the specifications for the point defects are not disclosed.
(1) Select “Long Panel Point Defect Specifications Excess Area Display”
from the DR Maintenance Software screen’s menu on the left.
(2) Select the panel which is desired for displaying the point defect areas.
REFERENCE
The FPD that can be selected here is the FPD whose logs are registered in the
MC, not the FPD which is currently connected.
(3) Click [Acquire].
1300_410017E.ai
(2)
(1)
The registered point defects are displayed.
The point defects which exceed the point defect agglutination specifications are
displayed via “ □ ”.
The point defects which exceed the point defect size specifications are displayed
via “ X ”.
REFERENCE
If there are not any point defects exceeding the specifications, the message
stating that there are not any defects exceeding the specifications is displayed.