FujiFilm DPC-R1, Руководство пользователя

Страница: 19 / 36

19
Using with a Macintosh
This section describes the setup procedure for using this product on a Macintosh. Note
that the setup procedures for Mac OS 8.6 to 9.2 and Mac OS X are different. The setup
procedure for Mac OS 8.6 to 9.2 is described below. See P.22 for the procedure for Mac
OS X.
Hardware and software requirements
To run this software, you must have the hardware and software described
below. Check your system before you begin the installation.
Mac OS 8.6 to 9.2
Compatible Mac Power Macintosh G3
✽
1 , PowerBook G3
✽
1
,
Power Macintosh G4, iMac, iBook,
Power Macintosh G4 Cube or PowerBook G4
Operating System Mac OS 8.6 to 9.2
✽
2
RAM 64 MB minimum
✽
3
Hard disk space Amount required for installation: 40 MB minimum
✽
1
Models with a USB port as a standard feature
✽
2
This software does not run correctly in the Mac OS X Classic environment.
✽
3
Turn virtual memory on if necessary.