
148
9 Changing the Machine Settings
[Prioritize Bypass Tray]
Specify whether to use the bypass tray when the paper tray is automatically selected from the print
driver.
When [On] is specified, the paper tray is automatically selected from the printer driver, and the
Bypass Tray is loaded with paper, the Bypass Tray will be used.
[Show Size Mismatch Error]
Specify whether an error is to be indicated on the operator panel in cases where the paper size
specified in the print driver matches that on the operator panel, but the paper size specified in the
print driver is different from that loaded in the specified tray.
Note
When [Off] is selected, there is a possibility that the following may occur with all trays.
- When the paper size is smaller than the document size, the back side of the paper may become soiled.
- Printing may take some time.
- Misalignment may occur with two-sided printing.
With Tray 1, the following may occur.
- Paper jams may occur when using paper sizes A5, B6 or smaller.
- Paper may remain inside the machine after printing.
- Paper jams may occur when using paper sizes smaller than A5 for two-sided printing.
With Tray 2 (250-Sheet Feeder) (optional), the following may occur.
- Paper jams may occur when using paper size A5 or smaller.
- Paper may remain inside the machine after printing.
With the Bypass Tray, the following may occur.
- Paper jams may occur when using paper size A5 or smaller for two-sided printing.
[Banner Sheet]
Specify banner sheet insertion position and the tray from which to print.
[Report 2-Sided Print]
Specify whether to print reports on both sides of a sheet of paper.
[Letterhead 2-Sided Print]
Specify whether to print on both sides of letterhead.
[Hex Dump]
All data sent to the machine is printed in hexadecimal and representation, facilitating
troubleshooting analysis. Control codes are not executed.
[Low Toner Alert Message]
Specify whether to show the alert message when toner is low.
[End of Drum Life]
Specify whether to stop printing when a drum cartridge reaches the end of its service life.