Fuji Xerox Versant 80 Press, Руководство пользователя

Страница: 948 / 1019

23 Appendix
948
A
ppe
n
d
ix
23
PDF Direct Print
PDF Direct Print is a feature that prints PDF files by directly using the lpr command instead
of a print driver. When this feature is used, the following items will be printed based on the
settings of [PDF] under [Print Mode].
Note • When you use the lpr command to print, specify the number of copies to be printed in the lpr
command. The copy quantity setting made on [Output Quantity] under [PDF] becomes invalid. If
the copy quantity is not specified in the lpr command, only one copy is printed.
•
Before you print PDF file using the lpr command, the LPD protocol of the machine must be started
with the control panel or CentreWare Internet Services.
• PDF Direct Print supports PDF version 1.6.
PDF Direct Print Settings
This section describes the available settings with the PDF Direct Print feature.
The settings configured here are valid when printing PDF files without using
"ContentsBridge" provided by Fuji Xerox.
z Output Quantity z Layout
z
2 Sided Printing
z
Paper Size
z
Print Mode
z
Output Color
z Collate z Process Mode
Setting Item
Item
Number
Value
Output quantity 401 Sets the number of copies to be printed.
[1-999] (Default: 1): 1-999 sheets
2 sided printing 402 Sets the 2 sided printing option.
[0] (Default) : 1 Sided
[1]
: 2 Sided, Flip on Long Edge
[2] : 2 Sided, Flip on Short Edge
[2 Sided Print] prints 2 sided in the orientation so that pages can be bound
along the long edge.
[2 Sided Print] prints 2 sided in the orientation so that pages can be bound
along the short edge.
Print mode 403 Selects which you prioritize: image quality or print speed.
[0] (Default) : Standard
[1]
: High Speed
[2] : Fine
The [Standard] setting prints in a standard speed and quality.
The [High Speed] setting prioritize the print speed.
The [Fine] quality setting prints in high quality but in a slower speed.
Collate 404 Selects whether to print multiple-sheet documents as collated sets (1, 2, 3...1,
2, 3...).
[0] (Default) : Off
[1]
: On