Fuji Xerox Versant 80 Press, Руководство пользователя

Страница: 710 / 1019

21 Maintenance
710
M
a
int
e
na
nc
e
21
-For Z fold, refer to "Z Fold Position Adjustment" (P.714).
-For Z fold half sheet, refer to "Z Fold Half Sheet Position Adjustment" (P.715).
Single Fold Position Adjustment
Adjust the single fold position.
1
Select [Single Fold], and then select [Change
Settings].
2
Specify [Sheets to be folded], and then select
[Sample Printout].
3
Select the tray in which you loaded paper, and
press the <Start> button.
A sample printout is printed.
4
Select [Close].
5
Check the sample printout, measuring the misaligned amount.
6
Select [Long at Left] or [Long at Right], and
enter the value you measured in step 5 in
[Value A Before Adjustment].
7
Select [Adjust].
8
Select [Sample Printout] again.
9
Select the tray in which you loaded paper, and press the <Start> button.
The sample printout is printed.
10
Select [Close].
11
Confirm the result of sample printout.
12
Adjust the alignment again if necessary.