Fuji Xerox Versant 80 Press, Руководство пользователя

Страница: 548 / 1019

13 Tools
548
Too
ls
13
„
Account Auto Setup for Card Login
Set whether or not to register new user information when [Login to Local Accounts] is
selected and an unregistered user holds a card over the smart card reader.
When [Disabled] is selected, the machine does not register the user. When [Enabled] is
selected, the machine registers the user automatically.
Note • When [Enabled] is selected, [User Name], [Service Access], and [Add User To Authorization Group]
will be displayed.
•
Set the user name by selecting [User Name].
•
When [Service Access] is selected, [Copy], [Scan], and [Print] will be displayed. You can set [Feature
Access] and [Change Account Limit] for each item.
• When [Add User To Authorization Group] is selected, you can select a user role and an authorization
group for the user.
• When [Passcode Entry for Smart Card Login] under [Tools] > [Authentication/Security Settings] >
[Authentication] > [Passcode Policy] is set to [On], you need to enter the passcode twice for the auto
assign.
„
Guest User
Set whether or not to permit a guest user when [Login to Remote Accounts] is selected. Set
the guest user passcode from 4 to 12 digits.
Note • Access restriction for each service cannot be specified for the guest user.
„
Use of Smart Card
Set whether or not to use smart card authentication when [Login to Remote Accounts] is
selected.
Note • This item is displayed when the Extensible Customization Function is set to be enabled. For more
information on Extensible Customization Function, refer to "Passcode Setting for Extended
Functions" (P.978).
„
Smart Card Link Mode
Set whether or not to require a passcode for smart card authentication.
„
Smart Card Certificate Verification
Set whether or not to verify the smart card certificate when a user uses the smart card.
When [Enabled] is selected, the owner of the smart card is verified not only by PIN code
verification but by certification verification of the smart card and private key match. In this
case, the upper level CA certificate of the smart card certification must be registered on the
machine.
When [Disabled] is selected, the owner of the smart card is verified by PIN code verification.
„
Kerberos Server Certificate Verification
Set whether or not to verify the Kerberos server certificate when a user uses the Kerberos
server as a remote authentication server.
Note • This item is displayed when the Extensible Customization Function is set to be enabled. For more
information on Extensible Customization Function, refer to "Passcode Setting for Extended
Functions" (P.978).
„
Smart Card Logout Timing
Select the logout method for smart card authentication when a contactless smart card is
used for authentication.
When [Log Out when Card is Removed] is selected, you can logout from the machine by
removing the smart card from the smart card reader. When [Log Out from Control Panel] is
selected, you can logout by operating the touch screen or control panel.