Fuji Xerox Versant 80 Press, Руководство пользователя

Страница: 531 / 1019

Setup
531
Too
ls
13
„
Output
Configure the stapling, hole punch, and output destination settings.
z Staple
Set the position for stapling.
z
Hole Punch
Set the position for punching.
z Output Destination
Set the output destination.
E-mail Notification
You can receive an e-mail notification when a file is saved in a folder or a job flow ends.
„
Name/E-mail Address
Set the recipient of the e-mail notification.
„
Message
Enter a message that is displayed in the e-mail message body.
„
When to Notify
Select the e-mail notification timing from [When file is stored] and [At the end of Job Flow].
„
Delete Recipient
Deletes all information for the selected recipient.
„
Edit
Allows you to check or change the recipient selected.
For more information on the [Edit Recipient] screen, refer to "Scan" (P.215).
„
Close Menu
Deselects the selected item.
Edit/Delete
You can check the content of a job flow sheet, and edit, copy, or delete it.
Note •
Some operations may be restricted according to types of job flow owners, authentication settings,
and user types. For more information, refer to "Authentication for Job Flow Sheets and Folders"
(P.647).
„
Delete
Deletes the selected job flow sheet.
„
Copy
Creates a duplicate of the selected job flow sheet. You can create a new job flow sheet based
on the duplicate.
The procedure of creation is the same as creation of a new job flow sheet. For more information, refer to "Create New Job
Flow Sheet" (P.527).
„
Edit
You can edit the selected job flow sheet.
The procedure of change is the same as creation of a new job flow sheet. For more information, refer to "Create New Job
Flow Sheet" (P.527).