Fuji Xerox Versant 80 Press, Руководство пользователя

Страница: 516 / 1019

13 Tools
516
Too
ls
13
Web Applications Service Setup
In [Web Applications Service Setup], you can specify the remote access destination.
Remote access allows you to view web application services, which are compatible with the
machine, directly on the touch screen, to upload a document that has been scanned on the
machine to the web applications, and to directly select and print a document that is stored
in the remote server. It also allows you to directly upload and print a file without going
through another computer.
Note • To use this feature, any Fuji Xerox manufactured web applications (sold separately) are required. For
more information, contact our Customer Support Center.
1
On the [Tools] screen, select [Web Applications Service Setup].
For the method of displaying the [Tools] screen, refer to "System Settings Procedure" (P.404).
2
Select an item to set or change.
Server Certificate Verification Settings
When the machine is connected to a remote server (ASP) that is located in the Internet zone,
server certificate verification is available to prevent phishing attempts as with a Windows
web browser. Configure the following settings.
Preparations
Download a root certificate (CA certificate) of the root certification authority, which issues
the server certificate for the remote server to be connected, to a computer connected to
CentreWare Internet Services.
The CA certificate formats that can be used are as follows:
z DER encoded binary X.509 (.CER)
z Base64 encoded X.509 (.CER)
z Cryptographic Message Syntax Standard - PKCS #7 Certificates (.P7B)
Setting Procedure
1
Start CentreWare Internet Services.
For information on how to start CentreWare Internet Services, refer to "Starting CentreWare Internet Services" (P.557).
2
Generate a certificate.
If you use an approved device certificate, proceed to step 3.
1) Click the [Properties] tab.
2) Click [Security] to display the items in the folder.
3) Click [Machine Digital Certificate Management].
4) Click the [Create New Self Signed Certificate] button.
5) Set [Public Key Size] and [Issuer], and then click [Apply].
After a short while, [Settings have been changed.] is displayed.
3
Enable SSL/TLS communication.
1) Click [SSL/TLS Settings].
2) Select the [Enabled] check box for [HTTP - SSL/TLS Communication].