Fuji Xerox Versant 80 Press, Руководство пользователя

Страница: 439 / 1019

Common Service Settings
439
Too
ls
13
„
Manual Process
Specify the adjustment values.
For information on setting procedures, refer to "Density Uniformity Adjustment (Manual Process)" (P.706).
Finisher Adjustment
Note • To use this feature, an optional component is required. For more information, contact our Customer
Support Center.
„
Hole Punch Tool
Specify the punch tool.
„
Adjust Booklet Fold Position
Set the booklet fold position for paper smaller or longer than B4.
„
Adjust Fold Position
You can adjust the fold position for each paper type and can set up to 10 adjustment types.
Also, you can assign the type to each tray.
z Fold Position Type Setup
Adjust the position for Single Fold, Booklet, C Fold, Z Fold, and Z Fold Half Sheet.
For more information on setting procedures, refer to "Fold Position Adjustment" (P.709).
z Trays 1 to 3, and 6 and 7
Assign an adjustment type to each tray.
„
DFA Finisher Profiles
You can edit profiles of the DFA finisher.
z Edit DFA Finisher Profile
Select to edit a profile.
„
Fold Assisting Crease
Set the number of additional folding lines between the specified fold line to prevent the
output of the folded booklet from opening.
Select from [1 Crease per Side], [2 Creases per Side], [3 Creases per Side], and [No Crease].
Note • The fewer the folding lines, the stronger the formation of creases.
Adjust Paper Curl
Adjust settings for removing curl from paper sheets.
Too much curl may cause paper jams and wrinkled output. If selecting a predefined option
([Type A], [Type B] or [Type C]) does not result in proper adjustment, set an appropriate
adjustment type in accordance with the characteristics of paper selected.
You can register up to 10 configuration sets.
For information on setting procedures, refer to "Adjust Paper Curl" (P.717).
z
Name
Select the name of the adjustment type.
z 1 Sided - Face Up
Set the adjustment value for 1-sided copying that is delivered facing up.
z 1 Sided - Face Down
Set the adjustment value for 1-sided copying that is delivered facing down.