Fuji Xerox Versant 80 Press, Руководство пользователя

Страница: 123 / 1019

Changing the Paper Settings
123
P
a
pe
r an
d
Ot
h
e
r M
e
di
a
3
Changing the Paper Settings
After loading paper in a tray, specify the type of paper loaded and select image quality for
the paper type. Setting Image quality for each paper type enables you to print with the most
suitable image quality for the paper type.
For information on image quality processing for each paper type, refer to "Image Quality" (P.153).
Note • Users can name Custom 1 to Custom 40 displayed in the paper type settings. Also, the users can
register paper types and detailed properties for Custom 1 to Custom 40. For more information, refer
to "Custom Paper Settings" (P.429).
• You can change the paper type setting without entering to the System Administration mode on the
[Setup] screen, which is displayed by selecting [Setup] in the Services Home screen if you configure
the settings in advance. For more information, refer to "Paper Tray Attributes on Setup Screen"
(P.433).
1
Press the <Log In/Out> button.
2
Enter the system administrator’s user ID with the numeric keypad or the keyboard
displayed on the screen, and select [Enter].
When a passcode is required, select [Next] and enter the system administrator’s passcode,
and select [Enter].
Note • The default user ID is "11111".
• The default passcode is "x-admin".
3
Select [Tools] on the Services Home screen.
Note • When the Services Home screen is not
displayed on the touch screen, press the
<Services Home> button.
4
Select [System Settings] > [Common Service
Settings] > [Paper Tray Settings].
1 2 3
4 5 6
7 8 9
0 ＃
<Log In/Out> button