
100
A Appendix
Entering Characters
To enter characters, use the numeric keypad on the control panel.
You can enter alphanumeric characters and symbols.
Using the Numeric Keypad
The following characters can be entered by pressing the corresponding buttons on the numeric keypad.
Locate the button labeled with the character you want to enter, and press the button repeatedly until the
character appears on the touch panel.
Each button displays the characters in the order indicated in the chart: a number, the lower-case characters,
and then the upper-case characters.
When a button is displayed continuously after the last character is displayed, it goes back to display the first
character and then the rest of the characters in the same order.
Example: When the [2] button is pressed repeatedly, the touch panel displays:
2 > a > b > c > A > B > C > 2 > a...
If you press the [
] button repeatedly when a character is displayed (before confirming its entry), the rest
of the characters will display in the reversed order.
Number Button
Assigned Numbers/Characters
[1] button
1 @ : . /
[2] button
2 a b c A B C
[3] button
3 d e f D E F
[4] button
4 g h i G H I
[5] button
5 j k l J K L
[6] button
6 m n o M N O
[7] button
7 p q r s P Q R S
[8] button
8 t u v T U V
[9] button
9 w x y z W X Y Z
[0] button
0 Space
[*] button
- _ ~
[#] button
! “ # $ % & ‘ ~ ^ \ |
`
; : ? @ _ , . + -
* / = ( ) [ ] { } < >