Fuji Xerox DocuScan C3200 A Скачать руководство пользователя страница 197

Страница: 197 / 244

8.2 Clearing Document Jams

197

DocuScan C3200 A

To open the left cover:

Hold the left cover of the document feeder
by the center, and lift it until it comes to a
stop.

Note
• The cover fixes into place when opened completely.

When opening the cover, do it gently.

If only one side of the document is jammed:

Turn the green wheel as illustrated, and pull
the document out slowly towards the
upward direction.

If both sides of the document are jammed:

Lift up the green lever and leave the inner
cover open.

Remove the document in one of the
following ways:

• Turn the green wheel as illustrated to

send the document to the output
direction, and pull the document out
slowly.

• Turn the green wheel as illustrated.

Slowly remove the document out of the
output roller towards the upward
direction.

Important

• Do not attempt to pull out the document without

turning the wheel. You may damage the document.

Close the inner cover opened in Step 3.

Содержание DocuScan C3200 A




















































































































































































































































Результаты поиска

Содержание DocuScan C3200 A

Отзывы:

Бренды по названию

Популярные бренды

Fuji Xerox DocuScan C3200 A, Руководство пользователя

Результаты поиска

Содержание DocuScan C3200 A

Отзывы:

Бренды по названию

Популярные бренды