Fuji Xerox DocuScan C3200 A Скачать руководство пользователя страница 196

Страница: 196 / 244

196

8 Problem Solving

• Turn the green wheel as illustrated to

send the document towards the output
direction, and pull the document out
slowly.

• Turn the green wheel as illustrated.

Slowly pull the document out of the
output roller towards the upward
direction.

Important

• Do not attempt to pull out the document without

turning the wheel. You may damage the document.

Close the inner cover opened in Step 3.

If the document is jammed at the output area:

Lift the document feeder tray, turn the
green wheel as illustrated, and then pull the
document out slowly.

Put the document feeder gently back into
its original position.

To close the left cover:

Close the left clover until it clicks into place.

Verify that the document is not ripped,
wrinkled, or creased, and re-load it into the
document feeder.

Содержание DocuScan C3200 A




















































































































































































































































Результаты поиска

Содержание DocuScan C3200 A

Отзывы:

Бренды по названию

Популярные бренды

Fuji Xerox DocuScan C3200 A, Руководство пользователя

Результаты поиска

Содержание DocuScan C3200 A

Отзывы:

Бренды по названию

Популярные бренды