Setting Documents
25
O
p
er
at
in
g
P
ro
ced
u
re
2
Thin and soft documents
When scanning thin and soft documents, load
them with the U-turn output guide removed.
If not removed, the U-turn output guide may
crease the document.
Setting Thick Documents
You can scan documents up to 12.7 mm thick on this machine. When scanning thick
documents, use the document thickness adjustment lever on the document handler.
Each lever position and its corresponding document thickness are shown below:
1
Measure the thickness of the document to be
scanned.
2
Adjust the document thickness adjustment lever
to the thickness of documents to be scanned.
3
With the side to be scanned facing down, align
the document with the document guide, and then
insert it until the leading edge touches the inte-
rior of the machine.
4
Remove the ejected document.
Lever Position
document Thickness
1st (scale 0mm)
0 to +/- 1mm
2nd (scale 2mm)
2mm +/- 1mm
3rd (scale 4mm)
4mm +/- 1mm
4th (scale 6mm)
6mm +/- 1mm
5th (scale 8mm)
8mm +/- 1mm
6th (scale 10mm)
10mm +/- 1mm
7th (scale 12mm)
12mm +/- 1mm
Содержание DocuScan C1500
Страница 34: ......
Страница 35: ...3 3 Maintenance This chapter describes how to clean the machine z Cleaning the Machine 34 ...
Страница 38: ......
Страница 48: ......