Fuji Xerox DocuPrint P455 D страница 124 Скачать руководство пользователя

Страница: 124 / 302

124

Printing Basics

Before loading the print media, flex the sheets and fan them. Straighten the edges of the stack on a level
surface.

Load the print media into the tray with the recommended print side facing up.

NOTE:

•

Do not exceed the maximum fill line in the tray. Overfilling the tray may cause paper jams.

Align the width guides and length guide against the edges of the print media.

Make sure that the paper is set properly by pressing down the paper from top.

After confirming that the guides are securely adjusted, insert the tray into the printer.

IMPORTANT:

•

Do not use excessive force on the tray. Doing so could damage the tray or inside of the printer.

NOTE:

•

If the front side of the tray is extended, the tray protrudes when it is inserted into the printer.

On the operator panel, select the appropriate paper size, and then press the

button.

Содержание DocuPrint P455 D














































































































































































































































































































Результаты поиска

Содержание DocuPrint P455 D

Отзывы:

Похожие инструкции для DocuPrint P455 D

Бренды по названию

Популярные бренды

Fuji Xerox DocuPrint P455 D, Руководство пользователя

Результаты поиска

Содержание DocuPrint P455 D

Отзывы:

Похожие инструкции для DocuPrint P455 D

Бренды по названию

Популярные бренды