Fuji Xerox DocuPrint P255 dw, Руководство пользователя, Страница: 101 / 252

Printer Connection and Software Installation 101
Auto Setup With the Access Point
If the access point such as a wireless router supports the WPS, security settings can be made
automatically.
• WPS-PBC
NOTE:
• WPS-PBC is a method to authenticate and register devices required for wireless configuration, by pressing
the button provided on the access point via wireless routers, and then performing WPS-PBC setting on the
operator panel. This setting is available only when the access point supports WPS.
1
On the operator panel, press the ( Menu ) button.
2
Select
Admin Menu
, and then press the button.
3
Select
Network
, and then press the button.
4
Select
WPS Setup
, and then press the button.
5
Select
Push Button Control
, and then press the button.
6
Select
Start
, and then press the button.
7
Press and hold the WPS button on the access point.
8
Wait a few minutes until the printer restarts to establish the wireless network.
9
Print a System Settings page from the operator panel.
a
Press the ( Menu ) button.
b
Select
Report/List
, and then press the button.
c
Select
System Settings
, and then press the button.
The System Settings page is printed.
10
Confirm that "Link Quality" is shown as "Good", "Acceptable" or "Low" on the report.
NOTE:
• When "Link Quality" is “No Reception”, check if the wireless settings are correctly configured.
• If the wireless setting does not work, contact your system administrator or Fuji Xerox Customer Support
Center.