Fuji Xerox DocuPrint M355 df, Руководство пользователя

Страница: 229 / 428

Faxing
229

Sending a Fax Manually
1
Load the document(s) face up with top edge in first into the DADF.
OR
Place a single document face down on the document glass, and close the document cover.
See also:
• "Loading an Original Document" on page 225
2
Press the ( Fax ) button.
3
Adjust the document resolution to suit your fax needs.
See also:
• "Adjusting the Document Resolution" on page 227
• "Adjusting the Document Contrast" on page 227
4
Select
OnHook
, and then press the button.
5
Select
On
, and then press the button.
6
Enter the remote fax machine's fax number using the number pad.
You can also select the recipient by using speed dial number or address book.
See also:
• "Automatic Redialing" on page 230
NOTE:
• You can enter a fax number using the ten key, *, and #.
• Pressing the
( Redial/Pause )
button enables you to enter a pause in the fax number.
• Entering "=" in the fax number enables dial tone detection.
• Entering ":" enables you to switch dialing type from dial pulse (DP) to push button (PB).
7
If the document is loaded in the DADF, press the ( Start ) button.
If the document is not loaded in the DADF, press the ( Start ) button, press the or button until the
desired setting appears, and then press the button.
NOTE:
• By pressing the
( Stop )
button, you can cancel the fax job at any time while sending the fax.