Unpack the machine and check the components
Read the Safety Guide first, then read this Quick Setup Guide for the correct installation
procedure.
NOTE:
• The available connection interfaces vary depending on the model.
• The illustrations in this Quick Setup Guide are based on the DocuPrint M268 z.
• The USB cable is a standard accessory.
Network cable
Use a straight-through Category 5 (or greater) twisted-pair cable for 10BASE-T or
100BASE-TX Fast Ethernet Network.
Remove the packing materials and install the toner cartridge
Load paper in the paper tray
Connect the power cord and turn on the machine
Configure the machine for faxing (for DocuPrint M228 fb / DocuPrint M228 z / DocuPrint M268 z)
If you do not plan to use the fax feature on this machine, go to step
5
.
A
Drum Unit
(Pre-installed)
USB Interface Cable
Quick Setup Guide
CD‑ROM
B
(For DocuPrint M228 fb /
DocuPrint M228 z /
DocuPrint M268 z)
Inbox Toner
Cartridge
Telephone Line Cord
(For DocuPrint M228 fb /
DocuPrint M228 z /
DocuPrint M268 z)
Safety Guide
Basic User's Guide
Connect the telephone line cord
A
B
B
A
A
B
3
4
2
1
Adjust the paper guides.
NOTE:
• To complete fax setup on your machine, see the
Basic User's Guide
.
• Your machine is programmed to automatically receive faxes. To change this default mode, see the
Basic User's Guide
.
Remove the orange part.
Remove the orange part.
Insert the paper with the print side face-up.
Quick Setup Guide
DocuPrint M228 b / DocuPrint M228 db / DocuPrint M228 fb /
DocuPrint M228 z / DocuPrint M268 dw / DocuPrint M268 z
ME7183E3-1 (Edition 1)
October 2014
Copyright © 2014 by Fuji Xerox Co., Ltd.
Fuji Xerox Co., Ltd.
