Fuji Xerox DocuPrint M218 fw, Руководство пользователя, Страница: 351 / 468

Using the Operator Panel Menus and Keypad 350
• Toner Refresh
Purpose:
To use up a toner cartridge when you need to replace it before the end of its life, or to stir the toner in
a new toner cartridge.
Values:
• Initialize NVM
Purpose:
To initialize NVM for system parameters, Address Book data for fax, or Address Book data for e-mail.
After executing this function and rebooting the printer, the menu parameters or data, except the
parameters for the network, are reset to their factory default values.
See also:
• "Resetting to Factory Defaults" on page 371
Values:
DocuPrint M218 fw:
• Non-Genuine Mode
Purpose:
To use toner cartridge of another manufacturer.
NOTE:
• Using non-genuine toner cartridges may make some printer features unusable, reduce print quality and
decrease the reliability of your printer. Fuji Xerox recommends only new Fuji Xerox brand toner cartridges for
your printer. Fuji Xerox does not provide warranty coverage for problems caused by using consumables not
supplied by Fuji Xerox.
• Before you use toner cartridge of another manufacturer, be sure to restart the printer.
Values:
Black Yes Cleans the toner in the toner cartridge.
No* Does not clean the toner in the toner cartridge.
User Fax Section Yes Initializes the fax number entries in the Address Book.
No * Does not initialize the fax number entries in the Address Book.
User Scan
Section Yes Initializes the e-mail and server address entries in the Address
Book.
No * Does not initialize the e-mail and server address entries in the
Address Book.
System Section Yes Initializes the system parameters.
No * Does not initialize the system parameters.
Toner Off* Does not use toner cartridge of another manufacturer.
On Uses toner cartridge of another manufacturer.