Fuji Xerox DocuPrint M218 fw, Руководство пользователя

Страница: 308 / 468

307 Faxing

Sending a Fax Using a Speed Dial
1
Load the document(s) face up with top edge in first into the ADF or place a single document face
down on the document glass and close the document cover.
See also:
• "Loading an Original Document on the ADF" on page 277
• "Loading an Original Document on the Document Glass" on page 278
2
To enter the speed dial number, do either of the following after pressing the Fax button:
• Select
Fax to
, and then press the button. Select
Speed Dial
, and then press the
button.
• Press the Speed Dial button.
3
Enter the speed dial number between 01 and 99 using the numeric keypad.
The corresponding entry's name briefly appears on the LCD panel.
4
Press the button.
5
Adjust the document resolution to suit your fax needs.
See also:
• "Resolution" on page 279
• "Lighten/Darken" on page 281
6
Press the ( Start ) button.
7
The document scans to the memory.
When you are using the document glass, the display prompts you for another page. Select
Yes
to add more documents or to select
No
to begin sending the fax immediately, and then press the
button.
8
The fax number stored in the speed dial location is automatically dialed. The document is sent
when the remote fax machine answers.
NOTE:
• Using the asterisk (*) in the first digit, you can send a document to multiple locations. For example, if you enter
0*, you can send a document to the locations registered between 01 and 09.