Fuji Xerox DocuPrint M218 fw, Руководство пользователя

Страница: 300 / 468

299 Faxing

Receiving a Fax Automatically in the TEL/FAX Mode or
Ans/FAX Mode
To use
TEL/FAX Mode
or
Ans/FAX Mode
, you must attach an external telephone to the phone
connector ( ) on the back of your printer.
In the
TEL/FAX Mode
, if the printer receives an incoming fax, the external telephone rings for the time
specified in
Auto Ans. TEL/FAX
, and then the printer automatically receives a fax.
In the
Ans/FAX Mode
, if the caller leaves a message, the answering machine stores the message as
it would normally. If your printer hears a fax tone on the line, it automatically starts to receive a fax.
NOTE:
• If you have set
Auto Answer Fax
and your answering machine is turned off, or no answering machine is
connected to your printer, your printer will automatically go into the fax receive mode after a predefined time.
See also:
• "Using an Answering Machine" on page 315