Fuji Xerox DocuPrint M215 fw, Руководство пользователя

Страница: 209 / 476

Copying 208
Making Copies From the ADF (DocuPrint M215 fw
Only)
IMPORTANT:
• Do not load more than 15 sheets into the ADF or allow more than 15 sheets to be fed to the document output
tray. The document output tray should be emptied before it exceeds 15 sheets or your original documents may
be damaged.
NOTE:
• To get the best scan quality, especially for color or gray scale images, use the document glass instead of the
ADF.
• A computer connection is not required for copying.
• You cannot load the following documents in the ADF. Be sure to place them on the document glass.
To make a copy from the ADF:
1
Load up to 15 sheets of 64 gsm documents face up on the ADF with top edge of the documents
in first. Then adjust the document guides to the correct document size.
NOTE:
• Ensure that you use the document guides before copying a legal-size document.
2
Press the Copy button.
3
Customize the copy settings including the number of copies, copy size, and image quality.
See also:
• "Setting Copy Options" on page 209
To clear the settings, use the ( Clear All ) button.
4
Press the ( Start ) button to begin copying.
NOTE:
• Press the ( Stop ) button to cancel a copy job at any time while scanning a document.
Curled originals Pre-punched paper
Lightweight originals Folded, creased or torn originals
Cut and paste originals Carbon paper