Faxing (DocuPrint M105 f Only)
264
Using an Answering Machine
You can connect a telephone answering device (TAD) directly to the back of your printer as shown
above.
•
Set your printer to
Ans/FAX Mode
and set
Auto Ans. Ans/FAX
to specify the time for the
TAD to respond.
•
When the TAD picks up the call, the printer monitors and takes the line if fax tones are received
and then starts receiving the fax.
•
If the answering device is off, the printer automatically goes into the fax receive mode after the
ring tone sounds for a predefined time.
•
If you answer the call and hear fax tones, the printer will answer the fax call if you
–
Set
OnHook
to
On
(you can hear voice or fax tones from the remote machine), and then
press the
(
Start
) button and hang up the receiver.
–
Press the two-digit remote receive code and hang up the receiver.
To the
wall jack
Printer
Line
Telephone Answering Device
Phone
Содержание DocuPrint M105 ab
