Fuji Xerox DocuPrint CM505 da, Руководство администратора

Страница: 85 / 599

Cleaning the Machine
85
M
ai
n
te
na
nc
e
3
Cleaning the Document Cover and Document Glass
If the document cover and document glass become soiled, smudges may appear on
copies, faxes, or scanned documents and the machine may not properly detect
document sizes.
To ensure clean copies at all times, clean the document cover and the document glass
about once a month.
Important • Do not use benzene, paint thinner, or other organic solvents. Doing so might damage paint
or coating on plastic parts.
• Cleaning the machine with an excessive amount of water may cause the machine to
malfunction or damage documents during copying, faxing, or scanning.
1
Wipe the document cover with a soft cloth
moistened with water to remove any dirt, and
then wipe it with a soft, dry cloth.
Important • Do not use cleaning agents other than
water or neutral detergent.
Note • If you cannot remove dirt easily, gently
wipe the document cover with a soft cloth
moistened with a small amount of neutral
detergent.
2
Wipe the document glass with a soft cloth
moistened with water to remove any dirt, and
then wipe it with a soft, dry cloth.
Important • Do not use cleaning agents other than
water or neutral detergent.
Note • If you cannot remove dirt easily, gently
wipe the document glass with a soft cloth
moistened with a small amount of neutral
detergent.
Cleaning the White Chute and Constant Velocity Transport Glass
If the white chute or constant velocity transport glass become soiled, smudges may
appear on copies, faxes, or scanned documents and the machine may not properly
detect document sizes.
To ensure clean copies at all times, clean the white chute and constant velocity
transport glass about once a month.
Important • Do not use benzene, paint thinner, or other organic solvents. Doing so might damage paint
or coating on plastic parts.
• Cleaning the machine with an excessive amount of water may cause the machine to
malfunction or damage documents during copying, faxing, or scanning.
1
Wipe the white chute with a soft cloth
moistened with water to remove any dirt, and
then wipe it with a soft, dry cloth.
Important • Do not press the film with an excessive
force as it can be easily damaged.
• Do not use cleaning agents other than
water or neutral detergent.
Note • If you cannot remove dirt easily, gently
wipe the film with a soft cloth moistened
with a small amount of neutral detergent.