Fuji Xerox DocuPrint CM505 da, Руководство администратора

Страница: 238 / 599

5 Tools
238
T
ools
5
3
Select [Change Settings].
4
Enter an amount with the keyboard
displayed on the screen or the numeric
keypad.
5
Select [Save].
Accounting / Billing Device Settings
You can configure accounting or billing device settings.
Important • When an accounting or billing device is connected to the machine, be sure to set a password
and that users other than the system administrator do not disconnect the device by mistake.
• The features described in this section may not appear for some models. Optional
components or related products provided by Fuji Xerox are required to use the features. For
more information, contact our Customer Support Center.
Connect with Accounting / Billing Device
Allows you to select whether or not to use the connected accounting or billing device from
[None] or [Connected].
Note • While a device for maintenance is connected, you cannot change the setting.
Accounting / Billing Device
Select the type of the accounting / billing device connected to the machine.
Important • If a device connected does not match the device selected in [Accounting / Billing Device], an
error occurs. Jobs related to the accounting / billing device cannot be performed until the
error is resolved. For information on how to resolve the error, refer to "Error Code" (P.592).
Track Print Jobs
The feature is effective for the Print service.
Select whether or not to track billing information for the print jobs. Select from [No Tracking]
and [Track with Accounting / Billing Device].
This feature is available for all accounting / billing devices.
Track Scan/Fax Jobs
The feature is effective for the Scan, Fax, and Internet Fax services.
Select whether or not to track billing information for the scan, fax, Internet fax, and server fax
jobs. Select from [No Tracking] and [Track with Accounting / Billing Device].
Interrupt Mode
The feature is effective for the Copy service.
Select whether or not to enable the Interrupt mode. Select from [Disabled] and [Enabled].
This feature is available for accounting / billing devices other than Card Activated -
Cumulative and Smart Card Reader.
Job with Insufficient Credit
The feature is effective for the Copy, Print, and Scan services.
Select the operation of the machine when the amount remaining in the accounting / billing
device becomes insufficient. Select from [Delete Job Immediately] and [Hold Job].
This feature is available for accounting / billing devices other than Card Activated -
Cumulative and Smart Card Reader.