Fuji Xerox DocuPrint CM505 da, Руководство администратора

Страница: 21 / 599

Energy Saver Mode
21
Before Usi
n
g the Mac
h
in
e
1
Energy Saver Mode
The machine is equipped with the Energy Saver mode that reduces the power
consumption by saving the electricity to the machine when no copy or print data is
received for a specified time.
The Energy Saver has two modes: the Low Power mode and the Sleep mode.
When you press the <Energy Saver> button or do not use the machine for a specified
period of time, the machine enters the Low Power mode.
When time exceeds the time specified in the Low Power mode, the machine then
enters the Sleep mode.
It extinguishes the touch screen and lights up the <Energy Saver> button on the control
panel. To activate the machine, press the <Energy Saver> button.
Pressing the <Energy Saver> button extinguishes the light and deactivates the Energy
Saver mode.
Note • When the following device is connected to the machine and a user operates the device, the
Low Power mode can be deactivated without pressing the <Energy Saver> button. If the
machine is in the Sleep mode, however, the Sleep mode will not be deactivated by the
following operation. Set the time long to elapse until the machine enters the Sleep mode
from the Low Power mode. For information on how to change the interval to enter the Low
Power mode and Sleep mode, refer to "Changing the Interval for Entering Energy Saver
Mode" (P.26).
- Touch the card to IC Card Reader (optional)
• When the machine is in the Authentication mode, the Authentication mode is exited once the
machine enters the Low Power mode.
„ Low Power Mode
The Low Power mode reduces the power to the control panel and the fusing unit.
Note • While the machine is in the Low Power mode, the power supply to the fusing unit is also
reduced.
„ Sleep Mode
The Sleep mode reduces the power to the machine even more than the Low Power
mode.
It takes longer time than the Low Power mode to deactivate the Sleep mode and enable
to use the machine.
Changing the Interval for Entering Energy Saver Mode
This section describes the procedures for setting the Energy Saver mode.
To activate the Energy Saver, set the time to elapse until the machine enters the Low
Power mode as well as the time to elapse until the machine enters the Sleep mode.
Note • You can set the time to elapse until the machine enters the Low Power mode and the Sleep
mode from 1 to 240 minutes in 1 minute increments.