Fuji Xerox DocuPrint CM505 da, Руководство администратора

Страница: 147 / 599

Common Service Settings
147
T
ools
5
Note • After the downloading is finished, the machine automatically restarts and upgrades the
software. After the machine restarts again and the [Services Home] screen is displayed, the
software upgrade is completed.
Power on Self Test
Set whether or not to perform self test when the machine is turned on and started up.
If any abnormal condition such as intentional program modification is found during the
program diagnosis, the machine stops starting up and records the information in the audit log.
Note • The information may not be recorded in the audit log depending on the status of program
malfunction.
• If the machine does not start, contact our Customer Support Center.
Adjust Color Registration
Allows you to calibrate the colors automatically or manually.
„ Auto Color Registration
Pressing [Start] executes the color calibration.
For more information, refer to "Auto Color Registration" (P.90).
„ Side Color Registration
After executing the automatic color calibration, you can manually adjust the horizontal colors
for yellow, magenta, and cyan by entering values.
You can enter from -5 to +5, and press [Adjust] after entering the values.
Pressing [Sample Printout] prints the sample that the values changed are reflected.
Note • Use Tray 5 and plain A4 size paper for this feature.
For more information, refer to "Side Color Registration" (P.91).
Adjust Paper Registration
Allows you to adjust print image position vertically and horizontally.
You can enter from -2.0 to + 2.0, and press [Adjust] after entering the values.
When you enter the amount in [Number of Sheets] and press [Sample Printout], the machine
prints the sample that the values changed are reflected.
Delete All Certificates/Initialize Settings
Deletes all certificates stored in the machine and initializes the security settings associated
with certificates. This feature is designed to use when you cannot use a certificate data in the
machine because of an abnormality of certificate file even when the certificate is set to
enabled for [SSL / TLS Settings] under [Connectivity & Network Setup] > [Security Settings].
Notify Job Completion by E-mail
You can receive the results of jobs performed by an e-mail notification.
Targeted Jobs
Select the service whose job result you want to receive by an e-mail notification. When
the target job is already selected, [Selected] is displayed.
You can select more than one target job from [Copy], [Fax], [Scan], [Print], or [Report].
Select the notification timing from [Notify at the End of Job] or [Notify when Error Only].
E-mail Addresses 1 to 5
Specify the e-mail addresses to notify the result of the jobs.
Note • When you select [Save] to exit this screen without specifying an e-mail address, the setting
of [Targeted Jobs] or [E-mail Message] is deleted.